Angle Seat Globe Valve Price Pneumatron
- Model:
- JOV-ASPP-44
- Brand:
- J&O
- Material:
- SS304 / SS316L
- Connection:
- Clamped/ Weld / Thread / Flange
- Gasket:
- PTFE
- Working Temperature:
- -10 degree C ~ +180 degree C
- Working Pressure:
- 0-16bar
- Operation:
- Pneumatic
- Payment:
- T/T, L/C, Western Union
An angle seat valve is a pneumatically actuated 2/2-way valve designed to control liquids, gases, steam, and compatible media through an angled flow path. The flanged version described here uses a stainless steel body, PTFE sealing, a plastic actuator, and a 0–16 bar working-pressure range with a medium-temperature range of -10°C to 180°C. Its angled seat geometry supports a compact flow path and fast pneumatic opening and closing.
Why the angled flow path matters
The inlet and outlet are arranged around the seat, so the fluid changes direction once inside the body. This creates an open passage with low resistance. Pneumatic models commonly use a piston actuator with normally closed, normally open, or double-acting configurations.
The term angle seat globe valve is also used for this valve family. Selection should focus on seat construction, flow coefficient Cv, pressure rating, sealing material, actuator force, and actual medium conditions rather than the product name.
Plastic actuator and pneumatic operation
A pneumatic piston actuator converts compressed air into linear stem movement for rapid switching. The plastic actuator version also reduces actuator mass and suits installations where a lighter housing is preferred.
For searches using the phrase angle seat valve pneumatron, the relevant configuration is a pneumatic angle seat arrangement in which air pressure drives the actuator and moves the seat. Air supply, spring arrangement, control function, and actuator size should be confirmed before specification.
Selection factors that influence service performance
| Selection factor | Practical effect | Check before ordering |
|---|---|---|
| Valve body | Corrosion resistance and strength | SS304 or SS316L suitability |
| Seal material | Media and temperature compatibility | PTFE suitability |
| Flow path | Pressure loss and flow capacity | Required Cv and flow rate |
| Actuator | Opening speed and available force | Air pressure and action |
| Connection | Mechanical integration | Flange, weld, clamp, or thread |
| Flow direction | Closing behavior and water hammer | Pressure and mounting direction |
How to assess angle seat valve price
Angle seat valve price should be compared against the specification rather than body size alone. Actuator configuration, flange standard, seal material, pressure class, and control accessories can change the final quotation. Before requesting price, the flow rate, pressure, temperature, medium, connection standard, and pneumatic function should be fixed.
Where this valve configuration fits
This stainless steel angle seat valve suits air, water, neutral gases, and compatible process media within the stated limits. Its angled flow geometry, PTFE sealing, pneumatic actuation, and multiple connection options make it suitable for automated shutoff duties requiring rapid cycling and compact installation.
Technical Data
| Valve Body Material: | 1.4404/1.4301, SS304/SS316L |
| Seal Material: | PTFE |
| Max working pressure: | 0-16bar |
| Medium Temperature: | -10 degree C ~ +180 degree C |
| Availably connection: | weld, thread, clamp, flange |
| Operated: | Pneumatic |
| Medium: | Neutral gas, air, water |
Product Parameter
