Sanitary Ball Valve Tri Clamp 3 Way Food Grade Valves
- Model:
- Place of Origin:
- Wenzhou, China
- Material:
- SS304/SS316L
- Connection:
- Welded
- Packing:
- Suitable Packing for Sea/Air Transport
- Payment:
- T/T, L/C, Western Union
- Medium:
- Water, Oil, Gas
A sanitary ball valve provides rapid on off isolation in clean process piping, with the ball rotating 90 degrees between open and closed positions. A three piece stainless steel construction is useful where the valve may need inspection, cleaning, or seal replacement, while a butterfly handle suits installations with limited handle space. The referenced configuration uses SS304 or SS316L, PTFE sealing, manual operation, and clamp, weld, thread, or flange connection options.
Why Three Piece Construction Matters
The three piece body separates into a central valve section and end connections, giving practical access for service. In sanitary processing, the internal flow path, seat fit, surface finish, and drainage arrangement influence cleanability. A full bore design can also reduce unnecessary flow restriction compared with reduced port arrangements.
| Selection factor | What to check | Why it matters |
|---|---|---|
| Body material | SS304 or SS316L | Corrosion resistance and media compatibility |
| Port configuration | Full bore or reduced bore | Influences pressure loss and flow passage |
| Seal material | PTFE or process specific elastomer | Chemical and temperature compatibility |
| Connection | Clamp, weld, thread, or flange | Determines installation and service method |
| Handle clearance | Available operating space | Prevents interference around nearby equipment |
Tri Clamp Connection and Valve Configuration
A tri clamp valve uses a sanitary clamp joint that can simplify assembly and removal compared with permanent welded connections. The connection should match the tubing standard, ferrule dimensions, gasket profile, and operating conditions. Clamp access is especially useful where routine inspection or disassembly forms part of maintenance.
A tri clamp 3 way valve serves a different flow routing purpose because its multi port body can direct one stream toward another branch. A conventional two way three piece valve is intended mainly for on off isolation, so choosing between these configurations depends on whether the process needs simple shutoff or flow diversion.
Where Sanitary Ball Valves Fit
Food grade valves are commonly selected in food, beverage, dairy, pharmaceutical, and similar clean processing lines where material selection and hygienic maintenance matter. The referenced valve is specified for water, oil, and gas media, with a working temperature range of -40°C to 150°C and working pressure of 0–10 bar.
The butterfly handle is useful when a conventional lever would interfere with adjacent piping or equipment. Available sizes of 1/2"–6" and DN15–DN150 allow the same valve concept to cover compact branches and larger process lines.
Three Piece Sanitary Ball Valve Selection
A sanitary ball valve should be selected by combining line size, medium, pressure, temperature, sealing material, connection standard, and available service space. The three piece format is particularly useful when valve access and component replacement must be considered during routine maintenance.
