Sanitary Hygienic Tri Clamp Ball Valve
- Model:
- Place of Origin:
- Wenzhou, China
- Material:
- SS304/SS316L
- Connection:
- Clamped
- Gasket:
- PTFE
- Packing:
- Suitable Packing for Sea/Air Transport
- Quantity:
- 100000 PCS Per Year
- Payment:
- T/T, L/C, Western Union
- Medium:
- Water, Oil
- Specification:
- 1/2"-4"
- Pressure:
- 0-10Bar
- Temperature:
- -20°~120°
A sanitary ball valve stops or diverts process fluids through a precision-machined spherical port matching piping diameters, preventing turbulence and liquid entrapment. Quarter-turn rotation allows instant line shutoff across bioprocess vessels while facilitating automated clean-in-place cycles. When flow halts, cavity-filled PTFE seals occupy internal dead legs around the sphere, preventing fermentation solids from lingering inside stagnant crevices.
Surface Electropolishing Protocols Against Microbial Biofilm Growth
Metallurgical composition dictates aseptic process integrity. Machining flow passages from forged 316L stainless steel provides resistance to pit corrosion caused by chloride solutions. Mechanical and electrochemical polishing produces internal surface finishes below 15 Ra microinches, complying with ASME BPE standards. This mirror finish prevents bacterial adherence and withstands repeated steam-in-place thermal cycles without micro-crack development.
Polymer Seat Compatibility Under Thermal Sanitization Loads
Different sealing polymers deliver variable mechanical stability during high-temperature washing cycles:
| Seal Material | Continuous Limit | Resistance Rating | Sanitation Media Compatibility |
| TFM 1600 | 200°C (392°F) | Cold Flow Resistant | Nitric acid, caustic soda, saturated steam |
| Virgin PTFE | 150°C (302°F) | Standard Compliance | Dilute acids, alkaline rinses, ambient WFI |
| Modified PEEK | 260°C (500°F) | High Pressure Wear | Continuous high-pressure pure steam |
Fast Disconnect Clamp Architecture For Field Maintenance Speed
Sanitization schedules depend on rapid hardware disassembly. Bolting an aligned tri clamp ball valve between process ferrules provides reliable containment under high static pressures while eliminating pipe threading risks. Technicians release single-pin hinged clamps within seconds, swiveling the three-piece center casing outward for seal inspections without disassembling adjacent process piping.
Cavitation Prevention During Shear-Sensitive Emulsion Transfer
Preserving delicate fluid matrices requires unrestricted channel geometry. Utilizing an engineered hygienic ball valve maintains laminar stream dynamics, preventing pressure drop spikes across high-viscosity viscous flows. This consistent conduit geometry protects protein structures from mechanical degradation during pump-driven liquid delivery.
Standardizing Process Reliability Across Sanitary Valve Installations
Installing certified hardware prevents cross-contamination across dairy, brewery, and pharmaceutical environments. Verifying material test reports ensures traceable alloy compliance before putting each sanitary valve into production service.
Product Description
| Size: | 1/2"-4", DN10-DN100 |
| Temperature: | -20ºC-120ºC |
| Pressure: | 10 Bar |
| Material: | AISI304, AISI316L |
| Gaskets: | PTFE FDA 177. 1550 Whatever The Connection, It Does Not Change The Total Length Of The Valve |
| Connection: | Clamp |
| Advantage: | Smaller And Lighter Than Other Type Ball Valve, Operating Torque Is Small, It Can Be Installed With Pneumatic Actuators And Electric Actuators. |
| Certificate: | PED/97/23/EC |
Product Parameter
