Sanitary Filter Strainer Compressed Air Inline
- Model:
- JOF-FLHY02-33
- Brand:
- J&O
- Material:
- SS304/SS316L
- Connection:
- Thread
- Gasket:
- EPDM / Silicon / NBR / FKM
- Payment:
- T/T, L/C, Western Union
A sanitary filter with a male-threaded Y-shaped body captures solid particles before they reach downstream pumps, valves, and other process equipment. The stainless steel assembly uses an internal screen to retain unwanted debris while allowing the process fluid to continue through the pipeline.
How the Angled Chamber Retains Solid Particles
A sanitary strainer directs fluid through a replaceable filtration element made from metal mesh, perforated plate, or wedge wire. The selected screen determines which particles can be retained. SS304 and SS316L body options suit different process environments, with the final choice depending on corrosion exposure and cleaning conditions.
Mesh Aperture and Flow Resistance Must Balance
The specified mesh range is 30–165 mesh. Finer screens can capture smaller particles but may clog sooner when the fluid contains a high solids load. A sanitary inline strainer should therefore be selected according to particle size, flow rate, acceptable pressure drop, and cleaning frequency rather than mesh count alone.
Thread Standards and Gasket Chemistry Need to Match
The threaded connection must match the pipeline’s thread standard, nominal size, and installation requirements. EPDM, silicone, NBR, and FKM gasket options require compatibility checks against the process medium, cleaning agents, and operating temperature. A mismatch can result in leakage or premature seal deterioration.
| Selection factor | What to verify | Operating impact |
|---|---|---|
| Particle size | Target solids and screen aperture | Determines retention performance |
| Flow conditions | Flow rate and allowable pressure drop | Influences screen loading |
| Connection | Thread standard and pipe dimensions | Prevents interface mismatch |
| Cleaning regime | Media residue and cleaning chemicals | Affects maintenance intervals |
Liquid Straining Is Not Compressed Air Filtration
A sanitary compressed air filter requires a design rated for gas service, with suitable pressure, flow capacity, and filtration performance. This liquid-focused Y-type assembly should not be assumed suitable for compressed air unless its specified application and ratings are confirmed.
Signs That the Screen Requires Inspection
Rising differential pressure, reduced flow, or uneven delivery can indicate screen blockage. Before opening the housing, the system must be isolated, fully depressurized, and drained as appropriate. The screen should then be inspected for deformation, residue buildup, or damage and cleaned or replaced according to the applicable maintenance procedure.
Before ordering, confirm pipe dimensions, thread compatibility, target particle size, process medium, gasket compound, and operating conditions. These checks support reliable filtration and reduce avoidable installation or maintenance problems.
Technical Data
| Type: | 1"-4" or DN25-DN100 |
| Material: | SS304 SS316L |
| Head Code: | Round |
| Technics: | Forged |
| Mesh: | 30 - 165 |
| Useful Surface: | 15% - 52.6% |
| Filters: | Metal Mesh, Perforated Plate And Wedge Wire |
| Packaging: | carton box or plywood case, |
Product Parameter
Product Pictures
