J&O Fluid

News

Pneumatic High Platform Ball Valve Is A Control Device Widely Used In Pipeline Systems

Publish Time: Author: Site Editor Visit: 42

Sanitary Ball Valve is a control device widely used in pipeline systems. It opens and closes by rotating the ball, and has the advantages of simple structure, corrosion resistance, and good sealing.

The following will introduce the technical characteristics of the pneumatic high-platform ball valve and related precautions:

1. Structural characteristics

The pneumatic high-platform ball valve is mainly composed of a ball, a joystick, a sealing gasket, and a connecting flange. Among them, the ball is one of the key components, and different shapes (such as full-through or flow-regulating) and materials (such as steel casting or plastic injection molding) can be selected according to different needs. In addition, the interface standard needs to be considered when purchasing to ensure matching with the pipeline system.

2. Working principle

When the air source pressure is applied to the piston, the piston pushes the output shaft to rotate the joystick and drives the ball to rotate at a corresponding angle. In addition, during use, the inlet and outlet directions need to be controlled to achieve the switching of the open and closed states, and a complete record must be established for each operation cycle to check for faults.
3. Precautions
During use, in order to ensure the normal operation of the equipment and maximize its life, please pay attention to the following aspects:
(1) Perform regular maintenance: including cleaning the valve surface, replacing the seal ring and grease, etc.
(2) Correct installation: The operation should be carried out according to the instructions in the product manual, paying attention to the interface standards, flange connection methods, and the surrounding structure of the pipeline system.
(3) Strictly control the pressure: avoid exceeding the rated working pressure range, and apply appropriate protective gas or lubricant to each part inside the equipment.
In short, the pneumatic high platform ball valve has good stability and reliability. It needs to be carefully checked before use and operated in accordance with relevant requirements. At the same time, it is recommended to choose a regular brand with high quality and low price to ensure product quality when purchasing.

Pneumatic High Platform Ball Valve Is A Control Device Widely Used In Pipeline Systems

This site uses cookies

We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.