Sanitary Clamp Tri Clover Non Return Check Valve

A sanitary check valve is an automatic inline backflow prevention device designed for hygienic processing systems, functioning through line differential pressure rather than external power to permit forward flow while instantly blocking reverse product migration. Utilizing spring-assisted disc displacement or gravity reseating, the unit prevents contamination between isolated process loops, eliminates vacuum collapse, and protects upstream pumps from hydraulic surge pressures.

Flow Dynamics and Cracking Calibration Across Clamp Check Valve Runs

In-line performance requires matching fluid viscosity to disc spring rates. Installing a clamp check valve allows rapid line disassembly during inspection cycles without cutting process piping.

The calibrated internal spring maintains an elastomeric seal against the metallic seat until upstream fluid pressure surpasses the opening threshold, usually set between 0.08 and 0.25 bar. Mismatched opening resistance causes rapid oscillation and cavitation, whereas balanced resistance guarantees immediate closure prior to negative pressure reversal.

Valve Configuration and Processing Line Compatibility

Tri Clover Check Valve Reseating Under Thermal Sterilization

Clean-in-place and steam sterilization cycles expose seals to rapid thermal expansion. A tri clover check valve built from forged AISI 316L stainless steel maintains dimensional tolerances during 140°C saturated steam exposures without galling. Precision machined ferrule faces compress elastomeric gaskets evenly, preventing gasket intrusion into product zones and eliminating micro-voids where process media might collect.

Zero Residue Drainage in Hygienic Non Return Valve Layouts

Aseptic integrity relies on complete evacuation following production runs. Positioning an eccentric hygienic non return valve maintains an uninterrupted horizontal bottom wall level with connecting sanitary tubing, facilitating full gravitational drainage without puddle formation. Controlled internal surface treatment below Ra 0.8 micrometer prevents biofilm retention, securing product purity throughout automated cleaning sequences without manual line strip-downs.

Technical Data

Product Parameter

Product Pictures