Spray Ball Rotating Rotary Tank Cleaning
- Model:
- Brand:
- J&O
- Material:
- SS304 or SS316L
- Connection:
- Clamped
- Working Pressure:
- 10Bar
- Payment:
- T/T, L/C, Western Union
A spray ball with a T-shaped design distributes cleaning liquid across targeted tank surfaces during clean-in-place (CIP) operations. The stainless steel assembly suits sanitary tank cleaning where spray direction, connection compatibility, and vessel geometry determine coverage. Proper selection reduces untreated areas and supports repeatable cleaning cycles.
T Geometry and CIP Coverage Inside the Vessel
SS304 and SS316L construction accommodates different sanitary processing environments. A mirror-polished surface supports cleanability, while the listed 0.5–2.5 inch (DN15–DN65) size range covers different installation requirements. The stated cleaning radius is 1.0–3.5 m, but actual coverage depends on flow rate, supply pressure, spray direction, and tank obstructions.
Fixed Spray Holes Versus a Rotating Mechanism
For rotating spray ball tank cleaning, the selected assembly must contain the specified rotating mechanism. A fixed design distributes cleaning liquid through stationary orifices, while a rotary spray ball uses a moving head to change the spray pattern. Their cleaning impact, maintenance needs, and operating requirements are not interchangeable.
The listed T-shaped configuration includes 180° and 360° spray patterns. A 2.5 mm aperture is specified for the fixed-hole design, so the actual spray configuration should be confirmed before ordering.
Four Checks Before Choosing the Cleaning Head
| Selection factor | What to confirm | Why it matters |
|---|---|---|
| Tank geometry | Diameter, height, and internal obstructions | Determines required coverage |
| Spray direction | 180° or 360° target area | Limits untreated surfaces |
| Supply conditions | Flow rate and operating pressure | Affects spray distribution |
| Connection | Clamp, thread, weld, or bolted interface | Ensures installation compatibility |
A rotating spray ball should be assessed against the required cleaning intensity and residue type, rather than selected on rotation alone. Persistent or heavily bonded deposits may require a different tank-cleaning technology.
Confirm Operating Limits Before Installation
The stated working pressure is 10 bar, but the operating conditions of the selected assembly must be confirmed before use. Connection details also require verification because available options can differ from the standard configuration.
Before ordering, confirm the tank dimensions, cleaning medium, supply conditions, spray pattern, and connection standard. These checks establish whether the T-shaped cleaning device suits the vessel and the intended sanitation cycle.
Technical Data
| Product Name: | Sanitary T- type Cleaning Ball |
| Material: | SS304 or SS316L |
| Standard: | 3A, SMS, DIN,ISO,RJT... |
| Size: | 0.5"-2.5" or DN15-DN65 |
| Connection Way: | Weld, Clamp,Thread,Bolt... |
| Cleaning Radius: | 1.0-3.5 m |
| Surface Finishing: | Mirror finish |
