Stainless Steel Tri Clover Clamp Fittings 3 4 Flange

A tri clover clamp secures two sanitary ferrules around a gasket to form a removable pipe connection with controlled compression. The three-piece heavy-duty design adds a hinged structure that distributes clamping force around the joint, making it suitable where frequent inspection, cleaning, and repeated assembly require a stable connection.

Three Piece Structure Improves Joint Control

Stainless steel tri clamp fittings normally combine two ferrules, one gasket, and one clamp. The gasket sits between the ferrule faces while the clamp applies radial force around the joint. A three-segment design can distribute this force more evenly than a simple single-pin arrangement, reducing the chance of uneven seating when the connection is assembled.

The listed configuration uses SS304 or SS316L stainless steel, a clamped connection, and food-grade silicone, Viton, or PTFE gasket options. Working conditions are specified up to 120°C and 10 bar, with surface treatment listed at Ra≤0.8.

Size Selection Starts With Ferrule Geometry

A common sizing mistake is treating the flange diameter as the nominal tube size. A tri clover flange must be matched with the corresponding ferrule and clamp geometry. Smaller sanitary sizes can also share the same ferrule face, so the tube outside diameter and actual flange dimensions should be checked before replacement parts are ordered.

For applications referencing 3 4 tri clamp fittings, the actual tubing and ferrule dimensions should be verified rather than relying only on the printed nominal size. This reduces mismatch between clamp, gasket, and mating components.

Gasket Fit Determines the Seal

A gasket must match the ferrule geometry, material requirements, temperature, and cleaning chemistry. Incorrect gasket dimensions can create uneven compression or an internal discontinuity at the joint. Proper alignment before tightening is equally important because excessive torque can deform the seal or place unnecessary load on the clamp.

A tri clover clamp therefore should not be selected as an isolated hardware item. Ferrule face dimensions, gasket material, tube OD, pressure, temperature, surface roughness, and connection frequency should be reviewed together. This approach produces a more reliable sanitary joint and makes routine line breakdown easier to manage.

Technical Data

Product Parameter

Product Pictures