Tri Clover Clamp Stainless Triclover Fittings

A tri clover clamp creates a demountable sanitary connection through gasket compression between two ferrules. The single-pin format suits process lines that require frequent inspection, cleaning, or component replacement without threaded joints. Correct ferrule alignment, gasket selection, clamp sizing, surface finish, and operating conditions determine connection reliability.

How a Single Pin Clamp Seals the Line

The clamp sits around two matching ferrule faces while the gasket occupies the sealing interface. Tightening the clamp applies circumferential compression and seats the ferrules against the gasket. This creates a compact connection with no internal threads exposed to the process path. A tri clamp therefore supports repeatable disassembly when a line is opened for inspection or cleaning.

What Matters When Choosing the Clamp

Stainless tri clamp fittings are selected around the complete joint, not the clamp alone. Tube outside diameter must match the ferrule standard, while gasket material should match temperature and process media. Surface finish also matters because rougher wetted surfaces can retain residue and make sanitation more difficult.

For the 13MHH-11 configuration, construction is available in SS304 or SS316L, with clamped connection and gasket options including food-grade silicone, fluoroelastomer, and PTFE. The stated operating temperature is up to 120°C and working pressure is 10 bar. Sizes cover 1/2 to 12 in or DN10 to DN300, with CNC-machined sanitary components and a stated surface roughness of Ra≤0.8 μm.

Tri Clover Clamp or Other Connection Type?

Triclover fittings and tri clamp connections are commonly used as interchangeable industry terms for the same sanitary clamp-style connection. During purchasing, the important checks are dimensional standard, matching ferrules, gasket profile, material grade, and service rating rather than terminology.

Practical Checks Before Assembly

Before assembly, ferrule faces should be clean, aligned, and free from visible damage. The gasket should sit evenly between mating faces, and the clamp should close without forcing misaligned components together. Excessive compression can damage a gasket, while insufficient compression can cause leakage.

For hygienic process systems, triclover fittings should be specified as a matched connection set rather than isolated hardware. This approach reduces sizing errors and supports repeatable maintenance across food, beverage, dairy, cosmetic, and pharmaceutical piping systems.

Technical Data

Product Parameter

Product Pictures