Tri Clover Clamp Fittings 2 Inch Triclover
- Model:
- Brand:
- J&O
- Material:
- SS304 or SS316L
- Connection:
- Clamped
- Gasket:
- Food Grade Silicone, Viton, PTFE
- Working Temperature:
- 120 degree C
- Working Pressure:
- 10Bar
- Payment:
- T/T, L/C, Western Union
A tri clover clamp secures two compatible sanitary ferrules around a gasket to create a detachable pipe connection. A mini type clamp suits smaller connection sizes when its ferrule dimensions, gasket profile, and operating limits match the installed assembly. Correct sizing and assembly support reliable sealing and easier routine maintenance.
How the Single Pin Structure Holds the Joint
The 13MHH mini clamp uses a compact single-pin arrangement for connecting sanitary ferrules. SS304 and SS316L stainless steel options accommodate different corrosion requirements, while the clamping mechanism holds the joint together under its specified service conditions. The connection depends on proper ferrule alignment and an undamaged gasket, not clamp tightness alone.
Ferrule Dimensions Determine the Correct Fit
Tri clover fittings require compatible flange geometry on both sides of the connection. Nominal tube size does not always equal ferrule flange outside diameter, so actual dimensions should be checked against the manufacturer’s drawing before selection.
A 2 inch tri clamp uses a different ferrule size from the mini 1/2–3/4 inch configuration listed for this model. These sizes are not interchangeable. The clamp, ferrules, and gasket must match the intended sanitary fitting standard to create a secure joint.
Gasket Contact and Surface Finish Affect Sealing
The listed gasket options include food-grade silicone, Viton, and PTFE. Selection depends on process-fluid compatibility, cleaning chemicals, temperature, and the required sealing arrangement. The specified surface finish is Ra ≤ 0.8 μm, providing a smooth contact surface when mating components are manufactured and maintained correctly.
| Selection check | What to verify | Why it matters |
|---|---|---|
| Ferrule interface | Flange diameter and profile | Confirms physical compatibility |
| Gasket | Material, bore, and seating | Reduces leakage risk |
| Clamp assembly | Pin, hinge, and closing condition | Supports secure engagement |
| Service limits | Pressure and temperature ratings | Keeps operation within approved conditions |
Assembly Checks for Repeatable Sanitary Sealing
Triclover fittings should be inspected for damaged ferrule faces, hardened gaskets, corrosion, and distorted clamp components. During assembly, the gasket must sit evenly between the ferrules, and the clamp must engage fully. Excessive tightening should not compensate for mismatched components or a damaged sealing surface.
The listed model specifies a working pressure of 10 bar and a working temperature of 120°C. Actual operating suitability depends on the specific configuration, gasket material, and assembly conditions.
Compact Connections and Routine Access
The mini clamp’s compact structure suits smaller sanitary joints that require periodic access for inspection and cleaning. Its detachable connection allows the joint to be opened without replacing the ferrules, while correct gasket seating and compatible flange geometry remain essential to maintaining a sound seal.
Technical Data
| Product Name: | Sanitary pipe clamp |
| Size: | 1/2"-3/4" |
| Material： | 304SS; 316(L)SS |
| Machine： | CNC Lathe Machine |
| Connection: | Tri Clamp |
| SurfaceTreatment: | Ra≤0.8 |
| Gasket | Food Grade Silicone, Viton, PTFE |
| Type | Ferrule; elbow; tee; cross, hosebarb etc. |
| Optional | Customized tri clamp fitting available |
| Packing Details: | within carton box or plywood case |
| Applied Industries: | Dairy, Cosmetic, Pharmaceutical, Food and Beverage Industrie |
Product Parameter
Product Pictures
